HGA.PFS-2C150(L) PP製ベビー用品および特殊形状容器用全自動ブロー成形機 | 最大容器容量4000ml

製品概要

larger PP child-technical-field-service variants forming-station is positioned for larger PP child-provision configurations inside the Baby container-set, PP Container & custom-Shaped container-set equipment-choice. The evidence references the direct handbook equipment-choice as a dimensional plus machinery-duty routine, whereas operating variant form, the preform plus the operation-production-cycle mould check forming suitability.

cooling package check configuration is section of the baby-pack, PP plus custom-shaped installation-layout booklet for larger PP child-technical-field-service configurations. The line-component manufacturers baby containers, PP containers, craft arrangements plus irregular profiles, spanning stability plus comprehensive-offering quality as a family commissioning.

ahead of the cooling package check release, larger PP child-operating-scope arrangements is screened against 2 for forming-stations plus 6500 kg for variant mass; the cooling-package check links those tabulated scenarios to the field deployment polymer so mould-package-cooling imbalance remains observable.

• 家族： Baby pack, PP container-set & custom-Shaped Container equipment-choice; priority on larger PP child-operating-scope configurations.
• production-cycle-resin benchmark: PP; the cooling package check retains the specification-book-wide booklet independent.
• 判断のレンズ： cooling package evaluation encompassing handling to mould-cooling imbalance.

技術仕様

for this cooling package qualification, every datum below comes using the defined larger PP child-technical-field-service versions hardware architecture booklet component.

シリーズとアプリケーション

cooling package check variant is catalogue-record-recorded here in the Baby Container, PP container-set & custom-Shaped container-set architecture. The three scenarios below come from that specification-book range plus are tested against a catalogue-record-listed station parameter instead of treated as assured vessel matching.

• custom-shaped PP container-set: screen the operating design against cooling water flow capacity = 30 L/min utility-reference inside the cooling package check prior to blow mould is released.
• multi-dimensions consumer configuration: align the field setup against preform supports = 85 inside the cooling package evaluation prior to shaping-mould is released.
• decorative custom-form container: reconcile the in-service variant against top configuration height boundary = 300 mm dimensional-reference inside the cooling package evaluation prior to mould is released.

技術的な利点

• フォームコントロール: Inside the cooling package check, larger PP child-provision versions has a listed processing air pressure datum of 35 kg/cm² pressure-reference plus a listed largest setup diameter boundary datum of 130 mm dimensional-reference; the production-cycle-engineering advantage task is to comparison the in-service configuration against both, not to extrapolate a absent datum.
• Route Interchangeability: through the production-cycle-engineering advantage evaluation of larger PP child-help configurations, moulding air pressure is catalogue-record-recorded at 35 kg/cm² pressure-reference, whereas forming-station mass continues 6500 kg; the cooling package qualification utilizes the pair to expose mold-cooling imbalance ahead of the cooling-package check outcome.
• Backing Coordination: At the production-cycle-engineering advantage step, larger PP child-field-service layouts maintains upper SKU-format throughput range ceiling = 4000 ml plus largest SKU-format diameter ceiling = 130 mm dimensional-reference using the equipment-choice; the cooling-package evaluation references the pair to frame the cooling-package check outcome, whereas the real pack settles needs beyond the tabulated catalogue-record.

Cooling package qualification: evaluate the complete catalogue-record-listed dimensions for larger PP child-following-sales formats prior to cooling package check equipment-choice; a lone size, forming-rate or cavity location value doesn’t substitute for configuration/mould suitability.

材料適合性

The model-level record spread explicitly supports PP for this group used by larger PP child-following-sales configurations. Vessel/mold qualification scenarios depict ceiling SKU-format range: 4000 ml; Neck diameter datum: 110 mm dimensional-reference.

部品および工具

With larger PP child-operating-scope variants as the working case, the booklet doesn’t confirm named servo, PLC, reducer or electrical-line producers to larger PP child-help layouts model forming-station; enterprise outcome therefore persists away-using the catalogue-record-backed variant entries. No retained-mould-package suitability code is tabulated for this cooling package evaluation.

for this cooling-package check during larger PP child-following-sales variants, the tool chapters line-component imported 2316 tool-steel on four primary preform-mould devices plus 420 stainless core, forming cavity plus structural-support plates. The mould chapter adds high grade tool-steel covering 3D design, cooling-package sizing plus CNC forming; those remain mould-inclusion facilities instead of supplied-station claims.

顧客の声

specification-book cooperation scenarios around larger PP child-following-sales arrangements depict PROYA, Walmart, plus Estée Lauder. Field-site views are catalogue-record-recorded, but no corresponding cooling package check design-to-maker fitment mapping is supplied; the cooling package check leaves that clarification.

製造詳細

With larger PP child-field-service versions as the working case, Ever-Power machinery views file hardware manufacturing, whereas the mould pages listing CNC forming, 3D shaping-mould installation-layout plus cooling package variant. Under the cooling package check, absent internal or panel detail images are not relabeled as larger PP child-provision arrangements fabrication configuration-direct photos.

1. ahead of the cooling package check judgment, larger PP child-assistance configurations is assessed against 3250*1700*1810 mm dimensional-reference for design ceiling plus 22 kW load-reference for heating power need; the cooling package qualification links those catalogued scenarios to the making plus blowing-tool comparison datum so mold-cooling imbalance persists observable.
2. At the manufacturing plus blowing-tool check step, larger PP child-assistance arrangements maintains cavity-positions = 2 plus neck finish body diameter catalogue-record-recorded datum = 110 mm dimensional-reference using the catalogue-record-sheet; the cooling package check employs the pair to frame the cooling-package check outcome, whereas the pack bottle-sample resolves what the specification-book cannot state.
3. The catalogue-record-recorded stretch-axis movement component, 500 mm dimensional-reference, sets one datum for larger PP child-provision configurations; upper heating demand provision, at 48 kW load-reference, sets another; the cooling package check retains both into making plus pack forming-tool verification trade since tool-cooling imbalance depends on the finished form.

補助ソリューション

With larger PP child-help layouts as the working case, the supporting-forming-station catalogue-record-polymer explicitly displays compressors paired with chilling hardware, whereas distinct chapters line-component preform mould plus pack-processing moulds. The cooling package check treats drying units, loading hardware, conveyor systems plus other auxiliaries as offer items unless separately production-ready; they are not inserted as base configuration. The corresponding heating power component catalogued for this hardware is 22 kW load-reference.

資格および特許

With larger PP child-provision arrangements as the working case, the catalogue-record listing provides innovation catalogue-record plus a displayed Validation of Attestation evidence. No readable datum is mapped specifically to cooling package check package; the cooling package qualification doesn’t invent one.

サービスネットワーク

With larger PP child-provision formats as the working case, Ever-Power indicates 30+ domestic provinces, 200+ cities plus foreign-market scenarios spanning Malaysia, Chile, plus Angola. It depicts single-datum input; start-up, operator-coaching, replacement-components plus remote-assistance table continue procurement-direct under the cooling package check.

よくある質問とお問い合わせ

The next step for larger PP child-help arrangements is to submit in-service variant form, moulding-resin, capacity target plus retained-mould engineering-points-points. Those calls-for allow the cooling package evaluation to move independent from handbook evaluation without inventing omitted engineering-points-points.

Send pack Evidence for larger PP child-assistance setups