HGS250A 5L容器用半自動PETブロー成形機 | カタログ効率

製品概要

5 L semi-automatic PET bottles variant is positioned for 5 L semi-automatic PET containers inside the Semi-Automatic PET blow-forming specification. The description services the corresponding catalogue-record-sheet series as a dimensional plus utility datum, whereas the in-service vessel, preform plus mould form decide closing interface suitability.

With 5 L semi-automatic PET containers as the working case, hot-fill production-cycle check configuration corresponds to the HGS semi-automatic PET line, whose equipment-choice record combines hydraulic/pneumatic linkage encompassing digital infrared heating plus alternative lock-mould structures.

With 5 L semi-automatic PET bottles as the working case, the hot-fill workflow qualification scenarios sealing-axis stroke at 50 mm dimensional-reference plus pack pack size at 5 L; in the hardware setup step, those two catalogue-record-recorded listings are checked together so hot-fill deformation isn’t hidden by a single headline datum.

• specification-book: Semi-Automatic PET forming moulding specification-book; priority on 5 L semi-automatic PET bottles.
• Feedstock datum: PET; the hot-fill workflow verification maintains the specification-book-wide specification-book exact.
• release lens: hot-fill workflow check comprising reaction to hot-fill deformation.

技術仕様

for this hot-fill sequence verification, every specification below comes using the exact 5 L semi-automatic PET containers forming-station forming-station booklet datum.

シリーズとアプリケーション

hot-fill production-cycle evaluation design is listed here in the Semi-Automatic PET blow-forming specification. The three scenarios below come from that handbook range plus are inspected against a tabulated hardware parameter instead of treated as guaranteed vessel interface suitability.

• frequent-mould-change container-set: resolve the fabrication container-set against mould presence form = 170-250 mm dimensional-reference inside the hot-fill method qualification prior to forming mould is released.
• small-batch beverage pack: assess the pack forming pack against power amount forming-station = 220V/50Hz inside the hot-fill route qualification prior to forming mould is released.
• プロトタイプコンテナ： assess the fabrication container-set against container-set pack amount = 5 L inside the hot-fill route evaluation prior to mould is released.

技術的な利点

• 形状制御: through the production-cycle-engineering evaluation of 5 L semi-automatic PET bottles, forming-mould territory form is catalogue-record-recorded at 170-250 mm dimensional-reference, whereas sealing-axis stroke remains 50 mm dimensional-reference; the hot-fill sequence check assignments the pair to expose hot-fill deformation ahead of the hot-fill production-cycle qualification equipment-choice.
• Method Matching: When 5 L semi-automatic PET packages reaches the production-cycle-engineering gate, the catalogue-record-sheet contributes 5 L for container-set container range plus 1600*560*1450 mm dimensional-reference for hardware reach form; the hot-fill workflow qualification treats these as evaluation records, not as permission to ignore hot-fill deformation.
• Air-water evaluation: With 5 L semi-automatic PET packages as the working case, 0.8 MPa appears to the specification-book family for production-cycle air pressure, whereas 250 mm dimensional-reference falls to open-mold stroke length; maintaining that separation inside the hot-fill production-cycle check prevents the production-cycle-engineering evaluation from turning two independent criteria into one.

Hot-Fill production-cycle verification: evaluate the complete listed form for 5 L semi-automatic PET packages prior to hot-fill method evaluation result; a lone rating, forming-rate or forming-station value doesn’t substitute for configuration/mould-package interface.

材料適合性

The model-level component catalogue-record-polymer explicitly supports PET for this handbook used by 5 L semi-automatic PET bottles. Container/forming-mould evaluation scenarios present Pack capacity: 5 L; forming mould ceiling: 170-250 mm dimensional-reference.

for this hot-fill route check, Ever-Power’s wider packaging catalogue-record-polymer presents PC, PCTG, PP, PET, plus PETG; during 5 L semi-automatic PET containers, the hot-fill sequence verification retains that specification-book-wide container-resin brand model-level from individual-variant interface suitability, plus TRITAN isn’t named in the submitted catalogue-record-sheet.

部品および工具

With 5 L semi-automatic PET vessels as the working case, the production-cycle-engineering catalogue-record-sheet doesn’t explain named servo, PLC, reducer or electrical-point brands to 5 L semi-automatic PET packages station configuration; company equipment-choice therefore continues outside the solution bookd package records. No previous-mould mould-package suitability datum is tabulated for this hot-fill method check.

for this hot-fill method check during 5 L semi-automatic PET packages, the blowing-mould chapters characterize imported 2316 tool-steel on four primary preform-tool hardware plus 420 stainless key, forming-cavity plus structural-support plates. The mould catalogue-record-polymer adds quality tool-steel, 3D mould design, cooling-water configuration plus CNC factory; those remain mould-scope facilities instead of received-configuration claims.

顧客の声

specification-book cooperation scenarios around 5 L semi-automatic PET containers present Walmart. customer-side-site images are catalogue-record-listed, but no defined hot-fill production-cycle evaluation variant-to-catalogue-record site-design mapping is delivered; the hot-fill operation-production-cycle verification maintains that distinction.

製造詳細

With 5 L semi-automatic PET vessels as the working case, Ever-Power workshop visuals record hardware manufacturing, whereas the forming-mould pages line-component CNC pack forming, 3D container-forming-mould architecture plus cooling package variant. Under the hot-fill route check, unrecorded internal or panel detail images aren’t relabeled as 5 L semi-automatic PET bottles fabrication configuration-defined photos.

1. The hot-fill production-cycle qualification for 5 L semi-automatic PET bottles starts featuring 500-980 bph output-benchmark on catalogue-record-sheet workflow-output benchmark; it then cross-screens 350 mm dimensional-reference on stretch-axis travel; that package plus forming mould screen operation-production-cycle leaves the hot-fill method verification equipment-choice tied to two specification-book facts instead of an assumed in-service line.
2. Two record anchors form the package plus container-forming-mould check check for 5 L semi-automatic PET packages: pack forming-tool channel form at 170-250 mm dimensional-reference plus hardware hardware mass at 490 kg; the hot-fill production-cycle check retains these assured whereas the assignment team investigates hot-fill deformation.
3. With 5 L semi-automatic PET packages as the working case, 500-980 bph output-benchmark corresponds to the catalogue-record-polymer equipment-choice for specification-book procedure-pack-rate datum, whereas 0.8 MPa lies to method air pressure; maintaining that distinction inside the hot-fill sequence verification prevents the package plus forming-mould screen check from turning two standalone criteria into one.

補助ソリューション

With 5 L semi-automatic PET bottles as the working case, the peripheral-package sheet explicitly includes air-compression units alongside chillers, whereas corresponding chapters datum preform-mould-package plus mould offerings. The hot-fill operation-production-cycle evaluation treats pack-polymer dryers, loading models, conveyors plus other extras as quotation components unless separately verified; they aren’t inserted as regular machinery. The model-level processing pressure datum available for this setup is 3.0 MPa.

資格および特許

With 5 L semi-automatic PET containers as the working case, the evidence segment shows IP certifications alongside a credential-evaluation evidence. No readable datum is mapped specifically to hot-fill production-cycle check hardware; the hot-fill sequence verification doesn’t invent one.

サービスネットワーク

With 5 L semi-automatic PET packages as the working case, the catalogue-record-recorded specification set identifies a 30+ province, 200+ city domestic channel plus exports plus single-documentation help. Site-configuration, education, spares plus remote technical-field-service summary stand purchase-step engineering-points in the hot-fill production-cycle check.

よくある質問とお問い合わせ

The next step for 5 L semi-automatic PET bottles is to submit pack forming pack form, polymer, forming-rate target plus retained-mould readings. Those needs allow the hot-fill production-cycle check to move outside specification-book check without inventing absent references.

Send Vessel engineering-points-points for 5 L semi-automatic PET containers