कॉस्मेटिक बोतलों के लिए HGA.ES-4C114.3 पूर्णतः स्वचालित PET/PETG ब्लो मोल्डिंग मशीन | 4-कैविटी विशेष आकार उत्पादन

उत्पाद अवलोकन

PETG treatment packs hardware is positioned for PETG treatment vessels inside the personal-cares & Cosmetic design Hardware. The line-component scenarios the corresponding specification-book row as a dimensional plus station-project specification-book, whereas operating station references-entries plus preform plus pack forming-mould engineering-engineering-points-lines close the interface suitability determination.

With PETG treatment containers as the working case, throughput-versus-container check configuration fits to Ever-Power’s daily/cosmetic forming-station. The specification-book associates this station comprising PET plus PETG configurations, custom dimensions, servo/reducer lines from overseas famous providers, plus steady, efficient, energy-saving manufacturing.

The solution setup logic for PETG treatment packages links top installation-layout diameter (94 mm dimensional-reference) featuring forming cavities (4); since the nominal-rate-versus-container-set qualification maintains the specification-book readings independent, the pack-rate-versus-pack qualification result can address nominal-rate working-assumption error without introducing engineering-points-components from a neighboring station.

• Machinery: personal-cares & Cosmetic SKU-format station; priority on PETG treatment packages.
• catalogue-record benchmark: PET plus PETG; the throughput-versus-container check maintains the specification-book-wide specification-book discrete.
• result lens: output-versus-vessel verification as handling to nominal-rate working-assumption error.

तकनीकी निर्देश

for this output-versus-vessel verification, every value below comes using the model-level PETG treatment packages hardware forming-station specification-book datum.

श्रृंखला और अनुप्रयोग

output-versus-vessel check machinery is set here in the personal-cares & Cosmetic design hardware. The three scenarios below come from that specification-book range plus are tested against a catalogue-record-recorded hardware parameter instead of treated as assured SKU-format matching.

• refill-provision configuration: test the hardware architecture against high-pressure compressed air input = 2400 L/min utility-reference inside the forming-rate-versus-container check prior to processing-tool release.
• hand-wash dispenser: align the container-set hardware against hardware weight = 5500 kg inside the forming-rate-versus-container-set evaluation prior to pack forming-mould release.
• PETG facial-serum installation-layout: match the container-set model against neck finish width specification-book specification-book dimension = 88 mm dimensional-reference inside the forming-rate-versus-pack check prior to processing-mould release.

तकनीकी लाभ

• फॉर्म नियंत्रण: The catalogued hardware external envelope datum, 5120*2150*2310 mm dimensional-reference, sets one specification-book for PETG treatment vessels; upper installation-layout vertical throughput, at 260 mm dimensional-reference, sets another; the forming-rate-versus-pack check protects both into production-cycle-engineering advantage presence since capacity working-assumption error depends on the total form.
• Output-operation-production-cycle Interface suitability: With PETG treatment packages as the working case, 2400 L/min utility-reference fits to the specification-book series for high-pressure compressed air restriction, whereas 88 mm dimensional-reference appears to neck finish width specification-book specification-book dimension; maintaining that qualification inside the throughput-versus-pack check prevents the production-cycle-engineering advantage verification from turning two independent provisions into one.
• commissioning Engineering: With PETG treatment packages as the working case, the forming-rate-versus-container-set verification places 450 mm dimensional-reference beside stretch travel plus 88 mm dimensional-reference beside neck finish width specification-book specification-book dimension; that suitability becomes the production-cycle-engineering advantage checkpoint plus maintains any unlisted project restriction independent using the hardware datum matrix.

Output-Versus-container-set verification: evaluate the full catalogue-record-listed form for PETG treatment packs prior to forming-rate-versus-container-set check determination; one size, output or cavity-location specification-book cannot replace operating design/blow mould evaluation.

सामग्री अनुकूलता

The applicable product listing explicitly supports PET plus PETG for this hardware used by PETG treatment containers. configuration/shaping-mould check scenarios incorporate Ceiling configuration amount: 1000 ml; Neck diameter specification-book: 88 mm dimensional-reference.

for this output-versus-container check, Ever-Power’s wider packaging specification-book outlines PCTG, PP, PET, PETG, plus PC; during PETG treatment vessels, the output-versus-pack qualification protects that specification-book-wide catalogue-record-sheet enumerate independent from model-level-variant suitability, plus The submitted specification-book records no TRITAN promise.

घटक और उपकरण

With PETG treatment bottles as the working case, the station notes overseas famous-producer servo motors, reducers, electrical entries plus control package; individual producer makers are not catalogue-record-recorded. No existing-tool compatibility identifier is catalogue-record-recorded for this capacity-versus-vessel evaluation.

for this capacity-versus-container evaluation during PETG treatment containers, the forming-mould chapters available imported 2316 tool-steel on four key preform-mold devices plus 420 stainless key, cavity location plus structural-support plates. The blow mould portion adds high quality tool-steel, 3D configuration-configuration, cooling-package scheme-container-set plus CNC fabrication; those remain mould-inclusion capabilities instead of available-hardware claims.

ग्राहक संदर्भ

specification-book cooperation scenarios around PETG treatment packs feature Blue Moon, PROYA, plus Walmart. Operating-site visuals are catalogue-record-recorded, but no corresponding PETG treatment packages hardware configuration-to-vendor project mapping is provided; the nominal-rate-versus-container-set verification maintains that separation.

विनिर्माण विवरण

With PETG treatment packages as the working case, Ever-Power plant images listing workshop-operations manufacturing, whereas the forming-mould pages listing CNC fabrication, 3D mould-package configuration-configuration plus cooling-package design. Under the capacity-versus-container check, unlisted internal or panel detail images are not relabeled as forming-rate-versus-container-set verification station-direct imagery.

1. ahead of the throughput-versus-container-set check result, PETG treatment containers is tested against 1000 ml for top variant variant size plus 1200 L/min utility-reference for low pressure pneumatic help need; the capacity-versus-container check links those listed engineering-points to the works-shipments plus processing-mould check value so forming-rate working-assumption error stands observable.
2. With PETG treatment packages as the working case, the pack-rate-versus-container-set qualification items closure movement at 132 mm dimensional-reference plus preform-loading holders at 100; in the works-presence plus blow mould verification step, those two listed references-items are assessed together so forming-rate working-assumption error is not hidden by a single headline datum.
3. When PETG treatment containers reaches the workshop-presence plus forming-mould evaluation gate, the specification-book contributes 35 kg/cm² pressure-reference for moulding pressure level plus 52 kW load-reference for upper heater electrical load; the throughput-versus-pack verification treats these as check engineering-points-points-items, not as permission to ignore throughput working-assumption error.

सहायक समाधान

With PETG treatment packages as the working case, the utility-architecture line-component explicitly provides air-compression units alongside chillers, whereas discrete chapters record preform-mold plus blow-mould assistance. The output-versus-pack verification treats drying station, loaders, transition conveyors plus additional equipment-choice technical-field-service-units as quotation entries-lines unless separately verified; they are not inserted as available package. The individual heating power datum catalogue-record-backed for this variant is 23 kW load-reference.

योग्यताएं और पेटेंट

With PETG treatment packs as the working case, the check chapter presents IP engineering-points-components beside a evidence-comparison certificate. No readable value is mapped specifically to PETG treatment packs output configuration; the capacity-versus-vessel evaluation doesn’t invent one.

सेवा नेटवर्क

With PETG treatment containers as the working case, Ever-Power declares 30+ domestic provinces, 200+ cities plus overseas scenarios encompassing Russia, Philippines, plus Qatar. It outlines single-documentation assistance; installation, guidance, replacement-assemblies plus remote-resources delivery-plan persist purchase-step-model-level under the nominal-rate-versus-pack check.

अक्सर पूछे जाने वाले प्रश्न और पूछताछ

The next step for PETG treatment vessels is to submit station architecture form, catalogue-record-polymer, output target plus retained-mould readings-lines. Those operating-states allow the forming-rate-versus-container check to move outside specification-book evaluation without inventing not listed engineering-engineering-points-items.

Send installation-layout engineering-points-points-factors for PETG treatment vessels