विवरण
उत्पाद अवलोकन
PP baby vessel-program blowing-mould machine-platform is positioned for PP baby vessel forming-mould inside the Baby Vessel, PP vessel-program & special-purpose-Shaped Vessel series-group. The spec-line services the applicable product-range field as a rating plus shop-program catalogue-source-point, whereas vessel output build, preform plus tool-set engineering-details check the eventual compatibility.
station-change evaluation model-choice is listing of the baby-container, PP plus special-purpose-shaped model-build product-manual-sheet for PP baby vessel-program blow mould. The product-manual vendors baby packages, PP vessels, craft variants plus irregular dimensions, encompassing stability plus entire-offering quality as a build installation.
The element fitment logic for PP baby pack container-mould links cooling water water project-need (30 L/min utility-reference) spanning low-side air provision provision (1500 L/min utility-reference); since the forming-cavity-change evaluation retains the product-manual spec-reference-points different, the station-change model-choice-check judgment can address forming-station-change delay without bringing-in specification-data from a adjacent product-manual model.
- उत्पाद रेंज: Baby vessel, PP vessel-program & special-purpose-Shaped vessel-program Group; priority on PP baby container blowing-tool.
- Container-resin foundation: PP; the cavity-work-position-change model-choice-check keeps the product-manual-wide product-manual-sheet independent.
- assessment lens: forming cavity-change validation comprising action to forming cavity-change delay.
तकनीकी निर्देश
machine-platform-engineering entries for PP baby pack processing-mould is limited to parameters product-manual-backed against PP baby vessel-program shaping-mold machine-package machine-platform. Unpublished constraints endure outside this spec-value table.
| पैरामीटर | सूची मूल्य |
|---|---|
| ऐस्पेक्ट | 2 |
| प्रीफॉर्म धारक | 74 |
| अधिकतम कंटेनर की मात्रा | 1000 मिलीलीटर |
| गर्दन के व्यास का संदर्भ | 100 मिमी |
| कंटेनर का अधिकतम व्यास | 110 मिमी |
| कंटेनर की अधिकतम ऊंचाई | 250 मिमी |
| सैद्धांतिक उत्पादन | 700 बैरल प्रति घंटा |
| क्लैम्पिंग स्ट्रोक | 160 मिमी |
| खिंचाव स्ट्रोक | 350 मिमी |
| अधिकतम तापन क्षमता | 66 kW |
| तापन शक्ति | 38 kW |
| कम दबाव वाली हवा की खपत | 1500 L/min |
| दबाव डालना | 30 किलोग्राम/सेमी² |
| उच्च दबाव वाली हवा की खपत | 1000 L/min |
| शीतलन जल का तापमान | 8-10 डिग्री सेल्सियस |
| शीतलन जल प्रवाह | 30 लीटर/मिनट |
| मशीन का आकार | 4510*1800*2050 mm |
| मशीन वजन | 4000 किलोग्राम |
श्रृंखला और अनुप्रयोग
cavity-work-position-change verification build is described here in the Baby vessel, PP Vessel & special-purpose-Shaped vessel-program series-group. The three project-cases below come from that product-manual model-build plus are validated against a shown machine-platform-set parameter instead of treated as promised pack compatibility.
- multi-vessel-shape consumer line-layout: reconcile the fabrication machine-platform-line-layout against forming pressure level = 30 kg/cm² pressure-reference inside the station-change validation prior to processing-mould is released.
- decorative special-purpose-vessel-shape vessel-program: align the output build against variant overall maximum = 4510*1800*2050 mm dimensional-reference inside the forming cavity-change model-choice-check prior to output-mould is released.
- craft line-layout: check the fabrication setup against upper build bottle-format amount = 1000 ml inside the forming cavity-change verification prior to forming-mould is released.
तकनीकी लाभ
- प्रोफ़ाइल नियंत्रण: The shown maximum heating power catalogue-source-value, 66 kW load-reference, sets one datum for PP baby vessel blow mould; build overall volume, at 4510*1800*2050 mm dimensional-reference, sets another; the forming cavity-change evaluation keeps both into machine-platform-engineering advantage trade since cavity-work-position-change delay depends on the complete form.
- Route Matching: In PP baby vessel vessel output-mould, the machine-platform-engineering advantage worksheet should copy cooling water temperature as 8-10 °C temperature-reference plus shown-product-manual-rated throughput as 700 bph output-benchmark; the forming cavity-change evaluation then matches those sources incorporating output build specification-data ahead of the forming-station-change verification model-choice-result.
- Hardware-program validation: With PP baby container shaping-mold as the working case, the cavity-work-position-change evaluation items preform-loading holders at 74 plus cooling water temperature at 8-10 °C temperature-reference; in the machine-platform-engineering advantage step, those two catalogued references are established together so forming-cavity-change delay is not hidden by a single headline datum.
Forming-cavity-Change evaluation: evaluate the total catalogue-recorded vessel-shape for PP baby container processing-mould prior to forming-station-change evaluation model-choice-result; one headline capacity, capacity or cavity work-position specification cannot endure in for line-layout/tool-set validation.
सामग्री अनुकूलता
The exact solution listing explicitly supports PP for this family used by PP baby pack output-tool. Container/mould model-choice-check project-cases comprise Cap bottle-format size: 1000 ml; Neck diameter catalogue-source-point: 100 mm dimensional-reference.
घटक और उपकरण
With PP baby vessel-program processing-tool as the working case, the product-manual-sheet doesn’t identify named servo, PLC, reducer or electrical-element brands to PP baby vessel blowing-mould variant equipment-set; company validation therefore keeps away-using the shown machine-platform readings. A carried-over mould matching code is not listed for this forming-station-change verification.
for this forming-cavity-change validation during PP baby vessel processing-mould, the tool chapters explain imported 2316 stainless-steel on four primary preform-mould devices plus 420 stainless leading, forming cavity plus frame members. The blow-mould chapter adds high quality stainless-steel plus 3D modelling, cooling-circuit line-layout plus CNC manufacture; those remain mold-service-range capacities instead of received-machine-platform-set claims.
ग्राहक संदर्भ
product-manual cooperation project-cases around PP baby vessel-program blow mould cover PROYA, Walmart, plus Estée Lauder. user-site visuals are catalogue-listed, but no defined cavity-work-position-change validation model-to-provider setup mapping is provided; the forming-station-change verification retains that clarification.
विनिर्माण विवरण
With PP baby container blow mould as the working case, Ever-Power factory photographs listing machine-platform-set processing, whereas the mold pages listing CNC manufacturing, 3D blowing-mold scheme plus cooling machine-package machine-platform-line-layout. Under the forming-station-change evaluation, absent internal or panel detail images are not relabeled as PP baby vessel mould processing model-choice-exact visuals.
- The forming-station-change verification for PP baby pack mould starts covering 1000 L/min utility-reference on high-pressure compressed air demand; it then cross-reviews 110 mm dimensional-reference on top model-build width catalogue-source-point; that processing plus processing-mould test procedure protects the cavity-work-position-change model-choice-check model-choice-result tied to two handbook facts instead of an assumed output line.
- With PP baby container blow mould as the working case, the forming cavity-change validation places 2 beside forming cavity count plus 30 kg/cm² pressure-reference beside shaping pressure level; that compatibility becomes the making plus vessel output-mould evaluation checkpoint plus carries any unlisted assignment need away-using the machine-platform-set spec-line listing.
- At the manufacturing plus blowing-mould check workflow-stage, PP baby pack container-forming-mould keeps upper model-build model-build capacity = 1000 ml plus upper vessel vertical volume = 250 mm dimensional-reference using the product-manual; the forming-station-change validation programs the pair to frame the cavity-work-position-change evaluation judgment, whereas the real vessel settles project-needs beyond the tabulated catalogue-source.
सहायक समाधान
With PP baby vessel shaping-mold as the working case, the ancillary-production-platform part explicitly illustrates compressors paired featuring chilling equipment-set, whereas discrete chapters evidence injection-preform mould plus vessel output molds. The forming-station-change validation treats drying equipment-set, feeders, conveyors plus additional help versions as bid materials unless separately substantiated; they are not inserted as common variant. The exact low-pressure air demand catalogue-source included for this model-build is 1500 L/min utility-reference.
योग्यताएं और पेटेंट
With PP baby vessel mould as the working case, the model-choice-result listing depicts peripheral-invention records together encompassing a qualification-check evidence. No readable spec-value is mapped specifically to forming-station-change model-choice-check equipment-set; the forming cavity-change validation doesn’t invent one.
सेवा नेटवर्क
With PP baby container blowing-mould as the working case, Ever-Power declares 30+ domestic provinces, 200+ cities plus foreign-market project-cases encompassing Yemen, Norway, plus Malaysia. It characterizes single-product-manual-content technical-support; setup, guidance, spare parts plus remote-resources lead-time hold purchasing-direct under the forming cavity-change evaluation.
अक्सर पूछे जाने वाले प्रश्न और पूछताछ
What form has to be checked prior to a PP baby vessel output-mold trial?
Two product-manual-sheet anchors form the vessel-program trial-bottle verification validation for PP baby vessel-program output-mould: catalogued-product-manual-rated output-rate at 700 bph output-benchmark plus preform-loading holders at 74; the cavity work-position-change validation keeps-separate these warranted whereas the project team investigates forming-station-change delay. The approved forming-station-change model-choice-check therefore inputs the fabrication container drawing or trial-bottle instead of a generic model-build design-assumption.
How should shown capacity be applied to PP baby vessel vessel output-mould?
The product-range prints 700 bph output-benchmark as shown volume for PP baby vessel processing-mould machine-platform. With PP baby pack container-forming-mould as the working case, the forming-station-change validation references stretch stroke at 350 mm dimensional-reference plus catalogue-recorded-shown output at 700 bph output-benchmark; in the capacity evaluation step, those two shown materials are established together so forming-station-change delay is not hidden by a single headline reading.
Is TRITAN catalogue-listed for forming-station-change validation model-choice?
What specification-data is outside the listed PP baby vessel-program shaping-mould machine-package equipment-set sheet?
In PP baby vessel-program shaping-tool, the estimate sizing worksheet should copy catalogue-recorded-shown output-rate as 700 bph output-benchmark plus low-side air vessel-program need as 1500 L/min utility-reference; the forming-cavity-change validation then compares those references encompassing machine-platform-operation setup entries ahead of the cavity-work-position-change evaluation model-choice-result. Send the machine-platform-operation vessel or drawing, intended moulding-resin, target throughput, blank spec-reference-points when related, plus reusable-tool specification-data; lead time plus backing extent are installed-transactional product-manual-content when the product-manual-content doesn’t set them.
With PP baby container container-blow mould as the working case, a useful inquiry carries vessel vessel-shape, resin, desired capacity, preform readings where corresponding plus any existing mould spec-reference-points. The forming-station-change validation can subsequently individual evidence-backed machine-package facts from assignment-applicable options.
