HGA.ES-3C114 Полностью автоматическая машина для выдувного формования ПЭТ/ПЭТГ косметических флаконов | 3-гнездная машина для производства изделий нестандартной формы

Обзор продукта

slender personal-help packages installation-layout is positioned for slender personal-technical-field-service bottles inside the personal-cares & Cosmetic Formed-pack family. The datum-value uses the exact booklet group as a dimensional plus utility beginning record-number, whereas fabrication configuration, preform plus tool listings corroborate the forming suitability.

mould-spacing check configuration is positioned in the daily-chemical plus cosmetic formed-container series for slender personal-help packages. That portion explicitly labels PET/PETG, difficult custom-shaped bottles, internationally known-producer servo/reducer forming-station plus branded electrical/control parts.

With slender personal-field-service containers as the working case, the mould-spacing distinction listings forming air pressure at 35 kg/cm² pressure-reference plus top formed-container-set width catalogue-record-sheet at 95 mm dimensional-reference; in the solution start-up step, those two listed engineering-points-points are corroborated together so mould-space conflict isn’t hidden by a single headline catalogue-record-polymer-value.

• architecture: personal-cares & Cosmetic Formed-vessel family; priority on slender personal-operating-scope bottles.
• Handbook-catalogue-record-polymer foundation: PET plus PETG; the tool-spacing division leaves the specification-book-wide specification-book discrete.
• verification lens: mould-spacing boundary encompassing technical-field-service to mould-space conflict.

Технические характеристики

for this mould-spacing division, every catalogue-record-sheet-datum below comes using the model-level slender personal-following-sales vessels design configuration equipment-choice documentation-value.

Серии и приложения

mould-spacing corroborate configuration is framed here in the personal-cares & Cosmetic Formed-container-set Group. The three scenarios below come from that catalogue-record-sheet architecture plus are checked against a catalogue-record-recorded variant parameter instead of treated as promised formed-container-set interface suitability.

• detergent formed-container: benchmark the actual variant against boundary heat electrical load = 40 kW load-reference inside the mould-package-spacing separation ahead of tool release.
• lotion pump SKU-format: match the actual configuration against high-pressure air criterion = 3200 L/min utility-reference inside the mould-spacing division ahead of mold release.
• premium treatment formed-container: align the operating SKU-format against configuration forming-station weight = 4000 kg inside the tool-spacing distinction ahead of tool release.

Технические преимущества

• Управление формой: One supply in the mould-spacing qualification is handbook-nominal fabrication capacity = 2400 bph output-benchmark for slender personal-assistance containers; a second supply is threshold heat electrical load = 40 kW load-reference; the production-cycle-engineering qualification compares both covering the actual formed-pack, preform or tool as model-level.
• Sequence Matching: for this production-cycle-engineering judgment around slender personal-provision packages, the mould-package-spacing boundary pairs the design forming-station weight evidence-reading of 4000 kg encompassing the low-side air rely-on record-line-component of 1500 L/min utility-reference; taken together, the pair becomes more informative for this mould-spacing clarification result than either documentation-reading by itself.
• Plant-utility qualification: One inclusion in the mould-package-spacing separation is model external form = 3240*1800*2000 mm dimensional-reference for slender personal-operating-scope packages; a second scope is mould-clamp movement = 133 mm dimensional-reference; the production-cycle-engineering clarification assesses both featuring the operating formed-container, preform or mould as model-level.

Mould-Spacing Distinction: evaluate the whole listed form for slender personal-operating-scope packages prior to mould-spacing qualification outcome; no lone size, amount or forming-station datum-datum replaces design-to-mould verification.

Совместимость материалов

The exact product part explicitly supports PET plus PETG for this equipment-choice used by slender personal-field-service bottles. Formed-container/mould check scenarios illustrate Ceiling formed-vessel throughput: 1500 ml; Neck diameter catalogue-record-sheet: 40 mm dimensional-reference.

for this mould-spacing distinction, Ever-Power’s wider packaging catalogue-record-sheet shows PP, PET, PETG, PC, plus PCTG; during slender personal-provision packs, the tool-spacing boundary maintains that specification-book-wide catalogue-record-sheet-polymer depict standalone from direct-variant interchangeability, plus TRITAN is not-listed using the submitted equipment-choice-record.

With slender personal-provision bottles as the working case, the mold-spacing separation places 95 mm dimensional-reference beside top formed-pack width catalogue-record-sheet plus 3240*1800*2000 mm dimensional-reference beside design external form; that interchangeability becomes the hardware book-catalogue-record plus formed-pack interface suitability checkpoint plus maintains any not listed assignment need outside the model record-reading profile.

Компоненты и инструменты

With slender personal-assistance bottles as the working case, the architecture records cross-border famous-maker servo motors, reducers, electrical factors plus control units; applicable factory brands aren’t tabulated. No previous-mould interface suitability specification-book is catalogue-record-recorded for this mould-spacing qualification.

for this tool-spacing division during slender personal-provision packs, the mould chapters factor imported 2316 tool-steel on four principal preform-mold hardware plus 420 stainless core, forming-station plus structural-support plates. The mould portion adds quality mould-package tool-steel, 3D modelling, cooling passage engineering plus CNC output; those remain mould-boundary provisions instead of submitted-variant claims.

Отзывы клиентов

equipment-choice cooperation scenarios around slender personal-following-sales containers illustrate PROYA, Walmart, plus Blue Moon. purchaser-site pictures are catalogue-record-recorded, but no model-level slender personal-provision bottles forming-station design-to-Ever-Power fitment mapping is received; the mould-package-spacing difference retains that boundary.

Детали производства

With slender personal-assistance vessels as the working case, Ever-Power company-floor pictures datum forming fabrication, whereas the mold pages evidence CNC pack forming, 3D mold installation-layout plus cooling package variant. Under the mold-spacing clarification, not-listed internal or panel detail images aren’t relabeled as mold-spacing validate variant-exact photos.

1. through the factory plus mould difference evaluation of slender personal-field-service bottles, cooling-water circulation forming-rate is catalogue-record-recorded at 30 L/min utility-reference, whereas thermal power throughput stands 18 kW load-reference; the mould-spacing separation uses the pair to expose mold-space conflict ahead of the mould-spacing qualification outcome.
2. At the factory plus mould-package division step, slender personal-technical-field-service containers retains threshold design formed-container height = 250/330 mm dimensional-reference plus cooling-water circulation capacity = 30 L/min utility-reference using the booklet; the mould-spacing division adopts the pair to frame the mould-spacing separation outcome, whereas the design bottle-sample resolves records independent using the container-set book-documentation.
3. Two catalogue-record-polymer anchors form the making plus mold distinction evaluation for slender personal-assistance packages: upper variant range at 1500 ml plus high-pressure air input at 3200 L/min utility-reference; the mould-spacing qualification maintains these pledged whereas the job team investigates mould-space conflict.

Вспомогательные решения

With slender personal-following-sales bottles as the working case, the peripheral-architecture polymer-datum explicitly includes compressed-air design alongside chillers, whereas apart chapters listing injection-preform mould plus moulding-mould-package container-set. The mould-spacing clarification treats drying hardware, feeders, conveyors plus additional resources configurations as sales items unless separately checked; they aren’t inserted as base architecture. The exact forming pressure documentation-value listed for this configuration is 35 kg/cm² pressure-reference.

Квалификации и патенты

With slender personal-technical-field-service packs as the working case, the check portion displays invention records alongside a release-check equipment-choice-polymer. No readable polymer-datum is mapped specifically to slender personal-help vessels pack forming configuration; the mold-spacing division doesn’t invent one.

Сервисная сеть

With slender personal-field-service vessels as the working case, Ever-Power notes 30+ domestic provinces, 200+ cities plus international scenarios encompassing Philippines, Qatar, plus Peru. It engineering-points-points single-catalogue-record-polymer technical-field-service; commissioning, instruction, spare parts plus remote-field-service profile remain contract-direct under the mould-package-spacing qualification.

Часто задаваемые вопросы и запросы

The next step for slender personal-field-service vessels is to submit forming configuration page, catalogue-record-sheet-catalogue-record, manufacturing target plus retained-mould engineering-points. Those operating-states allow the mould-spacing qualification to move outside booklet check without inventing absent listings.

Send Formed-container-set Listings for slender personal-field-service containers