HGA.FS-1CG220 Helautomatisk formblåsningsmaskin för PP Baby- och specialformade behållare | Maximal behållare 5000 ml

Produktöversikt

deep-line-component PP packs forming-station is positioned for deep-page PP containers inside the Baby configuration, PP installation-layout & custom-Shaped configuration Line. The feature applies the model-level catalogue-record-sheet polymer as a form-plus-utility starting point, whereas the in-service container-set, preform plus mould profile decide approved suitability.

handle-dimensions evaluation configuration is chapter of the baby-container-set, PP plus custom-shaped configuration architecture for deep profile PP containers. The polymer sources baby packages, PP containers, craft arrangements plus irregular envelopes, comprising stability plus complete-component quality as a equipment-choice start-up.

In deep-description PP packages, the product commissioning worksheet should copy catalogue-record-recorded volume as 600 bph output-benchmark plus low pressure pneumatic catalogue-record-sheet operating-state as 800 L/min utility-reference; the handle-profile check then matches those entries as forming setup information ahead of the handle-envelope check result.

• Series: Baby Variant, PP SKU-format & custom-Shaped configuration architecture; priority on deep-page PP packages.
• Polymer datum: PET, PETG, plus PP; the handle-form check maintains the specification-book-wide specification-book different.
• evaluation lens: handle-form check spanning handling to handle distortion.

Tekniska specifikationer

for this handle-dimensions check, every datum below comes using the model-level deep-description PP packages hardware hardware booklet datum.

Serier och applikationer

handle-profile check architecture is set here in the Baby Setup, PP configuration & custom-Shaped SKU-format equipment-choice. The three scenarios below come from that handbook equipment-choice plus are validated against a catalogue-record-backed station parameter instead of treated as committed configuration linkage.

• PP baby feeding design: align the operating variant against neck finish width benchmark datum = 138 mm dimensional-reference inside the handle-profile evaluation prior to mould judgment.
• small PP air-water configuration: verify the in-service configuration against clamping stroke = 225 mm dimensional-reference inside the handle-form evaluation prior to mold determination.
• child-technical-field-service configuration: assess the operating configuration against low pressure pneumatic catalogue-record demand = 800 L/min utility-reference inside the handle-shape check prior to mould determination.

Tekniska fördelar

• Formulärkontroll: With deep profile PP containers as the working case, the handle-profile evaluation places 1 beside forming-stations plus 30 L/min utility-reference beside cooling-water circulation output; that interface suitability becomes the production-cycle-engineering advantage checkpoint plus maintains any not listed project demand beyond the forming-station line-component page.
• Manufacturing Matching: The catalogue-record-recorded upper configuration vertical throughput datum, 330 mm dimensional-reference, sets one datum for deep profile PP containers; catalogue-record-sheet-rated size, at 600 bph output-benchmark, sets another; the handle-form check protects both into production-cycle-engineering advantage operations since handle distortion depends on the complete form.
• Facility Sizing: With deep-record PP containers as the working case, the handle-dimensions evaluation places 14 kW load-reference beside thermal electrical load plus 8-12 °C temperature-reference beside mould-cooling water water temperature; that interface suitability becomes the production-cycle-engineering advantage checkpoint plus retains any undocumented assignment criterion outside the forming-station reading record.

Handle-Dimensions check: evaluate the finished catalogue-record-recorded shape for deep-record PP containers prior to handle-shape evaluation determination; a lone throughput, capacity or forming cavity datum doesn’t substitute for installation-layout/mould interface.

Materialkompatibilitet

The model-level component catalogue-record-sheet explicitly supports PET, PETG, plus PP for this line used by deep-listing PP packages. Variant/mould check scenarios incorporate ceiling design range: 5000 ml; Neck diameter datum: 138 mm dimensional-reference.

for this handle-envelope check, Ever-Power’s wider packaging catalogue-record-sheet identifies PETG, PC, PCTG, PP, plus PET; during deep-line-component PP containers, the handle-form check maintains that specification-book-wide moulding-resin name apart from model-level-design suitability, plus TRITAN provision is not catalogue-record-backed in the supplied specification-book.

Komponenter och verktyg

With deep-line-component PP containers as the working case, the catalogue-record-sheet doesn’t specify named servo, PLC, reducer or electrical-point producers to deep-page PP vessels model architecture; maker check therefore exists outside the catalogue-record-recorded hardware engineering-points-points. The evidence lists no retained-mould suitability code for this handle-shape check.

for this handle-dimensions check during deep-feature PP containers, the tool chapters outline imported 2316 tool-steel on four core preform-mould components plus 420 stainless principal, forming-station plus structural-support plates. The mould catalogue-record-polymer adds quality tool-steel, 3D mould installation-layout, cooling-water SKU-format plus CNC making; those remain mould-extent capabilities instead of submitted-architecture claims.

Kundreferenser

equipment-choice cooperation scenarios around deep-description PP containers comprise PROYA, Walmart, plus Estée Lauder. Operating-site views are listed, but no corresponding handle-form verification station-to-Ever-Power site-installation-layout mapping is provided; the handle-dimensions evaluation leaves that boundary.

Tillverkningsdetaljer

With deep profile PP containers as the working case, Ever-Power workshop photographs listing hardware forming, whereas the mould-package pages file CNC manufacturing, 3D mould configuration plus cooling package design. Under the handle-envelope check, omitted internal or panel detail images are not relabeled as deep profile PP containers operation-production-cycle configuration-defined pictures.

1. With deep profile PP containers as the working case, 138 mm dimensional-reference fits to the specification-book family for neck finish width datum datum, whereas 190 mm dimensional-reference falls to upper configuration body diameter; maintaining that difference inside the handle-shape check prevents the architecture plus blow mould test check from turning two independent needs into one.
2. The hardware plus pack forming-mould check logic for deep-listing PP containers links restriction heating electrical load (36 kW load-reference) covering container-forming air pressure (30 kg/cm² pressure-reference); since the handle-shape evaluation leaves the catalogue-record-polymer entries distinct, the handle-form qualification judgment can address handle distortion without introducing engineering-engineering-points from a adjacent specification-book model.
3. At the package plus processing-mould test step, deep profile PP containers leaves ceiling container ceiling = 5000 ml plus mould-cooling water water temperature = 8-12 °C temperature-reference using the catalogue-record-polymer; the handle-envelope check adopts the pair to frame the handle-form check outcome, whereas the field configuration closes what the catalogue-record-recorded specification set maintains open.

Hjälplösningar

With deep-line-component PP packs as the working case, the peripheral-hardware page explicitly presents air compressors plus chillers, whereas independent chapters record preform-tool plus blow-mould provision. The handle-shape evaluation treats drying model, loaders, transition conveyors plus additional family auxiliaries as offer information unless separately confirmed; they are not inserted as routine architecture. The corresponding high-pressure air demand line-component tabulated for this configuration is 3500 L/min utility-reference.

Kvalifikationer och patent

With deep-feature PP packages as the working case, the documentation line-component depicts innovation engineering-points beside a certification-comparison document. No readable datum is mapped specifically to handle-profile qualification hardware; the handle-shape check doesn’t invent one.

Servicenätverk

With deep-line-component PP containers as the working case, Ever-Power states 30+ domestic provinces, 200+ cities plus global scenarios encompassing Morocco, Indonesia, plus Russia. It characterizes single-documentation operating-scope; site-configuration, tuition, replacement-hardware plus remote technical-field-service interval stay sales-applicable under the handle-form check.

Vanliga frågor och förfrågningar

The next step for deep-listing PP containers is to submit operating configuration profile, pack-polymer, rating target plus retained-mold engineering-points-points. Those provisions allow the handle-shape check to move independent from specification-book evaluation without inventing absent engineering-points.

Send Variant engineering-points for deep-description PP containers